Cloud, web and on-premise access-control options using MPA1, MPA2 and current MPA controller families.
Products and selection guidance
Honeywell positions MPA controllers for MAXPRO Cloud and web/on-premise management. MPA1 serves single-door applications while MPA2/MPA4 address larger door counts and panel loops. Confirm hosted mode, controller firmware, loop topology, readers, video integration and subscription/support requirements.
- MAXPRO Cloud, web and on-premise hosting choices
- MPA1 single-door and MPA2/MPA4 multi-door panels
- Panel loop, expansion and NetAXS coexistence
- Video, intrusion and identity integration requirements
- Door, lock, free-egress, accessibility and fire-alarm requirements
- Network, power, standby battery and outage behavior
- Current licenses, subscriptions, firmware and integrations
- Administrator training, backup, documentation and maintenance
Site-specific design
Boston High Tech inventories existing equipment and validates current manufacturer compatibility before specifying reuse, migration or replacement. Qualifications may be confirmed privately when needed; license numbers, certificate copies and named certificate-holder details are not published.
Request a manufacturer-specific consultation
Projects are supported from our Charlotte headquarters and local client offices serving Massachusetts, New York and New Jersey.
Official manufacturer references
How to compare and specify this product family
For Honeywell MAXPRO Access and MPA Controllers, the right model and architecture depend on the site, existing infrastructure and operating policy. A proposal should clearly document the following access-control system decisions before equipment is ordered:
- Number and type of controlled openings
- Controller, reader, lock and credential compatibility
- Cloud or on-premise administration and ownership
- Offline behavior, backup power and emergency operation
- Directory, HR, video, visitor and elevator integrations
- Licensing, cybersecurity, training and lifecycle support
Installation, testing and handoff
A site survey records each opening, door hardware, cable path, power, network, credential policy and integration requirement. The design then maps readers, controllers, locks, inputs, outputs and administrator roles to the operational workflow. Commissioning includes door-by-door functional tests, failure-mode and backup-power checks, permission and schedule tests, event verification, administrator training and as-built documentation. Product availability, subscriptions and supported integrations are confirmed for the current project before procurement.
Frequently asked questions
Questions that come up when comparing MPA1, MPA2 and MPA4 controllers and choosing between MAXPRO Cloud and on-premise management.
Is MPA1 enough for us, or should we start with MPA2?
Honeywell positions MPA1 for single-door applications, while MPA2 and MPA4 address larger door counts and panel loops. Count the controlled openings you have today and the ones already on the drawings, then match that count to the panel family and to the loop topology the building can support. The door schedule, not the first panel price, settles the mix.
Do we have to put this in the cloud?
No. Honeywell positions MPA controllers for MAXPRO Cloud and for web or on-premise management, so hosting is a decision you make with your IT group. That decision changes who owns administration, backups and updates, whether a subscription and support agreement belongs in the price, and how remote access to the management software is protected.
We run NetAXS panels today. Does all of it have to come out at once?
Not necessarily. NetAXS coexistence is one of the items the design addresses, so existing panels, loop wiring, readers and door hardware are inventoried before reuse, migration or replacement is specified. What can stay depends on the loop topology the new controllers require and on controller firmware, both of which are confirmed against Honeywell’s current documentation before procurement.
What has to be in place at the panel location itself?
MPA controllers need a network path, adequate power and a standby battery sized to the outage behavior the site requires, in an enclosure with room for the loop and expansion the door schedule implies. Write down before ordering which doors must keep reading credentials during an outage, which release on the fire-alarm interface, and how long that condition has to hold.
Can we see camera video next to the access events?
Video integration is listed as a requirement to confirm for the project rather than a feature to assume, so name the video, intrusion and identity systems during design and confirm each one against the hosted mode and controller firmware you intend to order. An integration available in one management mode does not carry over to another without being checked first.
We have a two-person IT team. What are we taking on after handoff?
Administrator training, backup, documentation and maintenance are recorded as decisions before equipment is ordered, and the hosting choice shapes them: subscription/support requirements and update responsibility sit differently for a hosted deployment than for a server your staff runs. Name the administrators, the backup method and the firmware update path in the proposal so the workload is visible beforehand.
Official Honeywell Commercial Security software, firmware and support
Official manufacturer resources. We link out rather than host firmware.
Before updating: confirm model, hardware revision, current version, entitlement and rollback plan, and schedule monitored or life-safety-adjacent systems with the administrator.